Arrayed Fiberoptics Corporation






	Arrayed Fiberoptics Corporation Announces High Return Loss 2D Fiber Arrays Arrayed Fiberoptics Corporation Announces Low-Cost, High-Performance Epoxy-Free Fiber Arrays

PRODUCTS

Collimator Array for Single-mode Optical Fiber (Preliminary) (Download PDF)

Advantages

High Performance - Exceptional beam quality, low insertion loss, excellent pointing accuracy
Low cost
Extremely small size and high density
Linear or 2-dimensional array configurations
Easy incorporation into hermetic packaging
High reliability
Strain relief packaging

Applications

Fiber collimator arrays may be used for collimation of light in DWDM, fiberoptic switches, attenuators, optical isolators, etc.

Specifications

Parameter	Specifications*		Units
Beam Diameter (1/e²)	100	200	μm
Working Distance	10	40	mm
Array Configuration	1x4 to 64x64		channels
Pointing accuracy	≤0.05		degrees
Insertion loss	≤0.5		dB
PDL	≤0.1		dB
Array pitch	≥150		μm
Max power	200		mW
Wavelength	1310, 1550, others		nm
Return loss	> 40		dB
Crosstalk	< -60		dB
Operating Temp	-5 to 70		˚C

* Contact Arrayed Fiberoptics for your specific requirements All specifications are subject to change without notice.

Ordering Information

Ordering Code: Collimator-array_λ_P_WD_ H_ N_AR(λ₁-λ₂)_FT/L/CT

Key:
λ - center wavelength (nm)
P - pitch (mm)
WD - working distance (mm)
H - number of rows in array
N - number of lenses per row of array
AR(λ₁-λ₂)- antireflective coating, if any, with wavelength range (nm)
FT - fiber type: SM - single-mode MM-multimode PM - polarization maintaining
L - length of fiber (m)
CT - connector type (NONE, FC/PC, LC, MPO, MT, MTP^TM, MT-RJ, MU, SC, SMA, ST)

Example: Collimator-array_1550_1.0_10_2_8_AR(1520-1580)_SM/1/NONE

A B C